Français
Deutsche
Español
日本語
Português
HUPARTS Magnetic Speed Sensor for GAC MSP678 Pick Up
Part Number: MSP678
Specification:
- Rotate speed sensor,
- speed sensor,
- generator sensors
- Item: MSP678
- Pickup Length: 5.00"
- Thread Length: 4.75"
- Overall Length: 6.125"
- Thread Size: 5/8-18 UNF-2A
- Drill Size: 37/64
Introduction:
*The magnetic speed sensor indicates when ring gear teeth, or other ferrous projections, pass the tip of the sensor.
*Electrical impulses are induced within the coil and sent to the speed control unit. The signal from the magnetic speed Sensor, teeth per second(HZ), is directly proportional to engine speed.
Description:
*The magnetic speed sensor is mounted in the ring gearcase or flywheel bell housing of the engine.
*The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth.
*A spot face should be present to provide a flat surface on which to anchor the lock nut.
*With the engine stopped, screw the speed sensor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the lock nut.
*Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications
*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.
*The leads may need shielding if they are longer than 10ft. (3m), or if external interference is present.
*Do not connect either of the speed sensors leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.
| GTIN, UPC, EAN, JAN or ISBN | 235264060112 |
|---|---|
| FEATURE | Introducing the MSP678 Rotate Speed Sensor, the ultimate solution for accurately measuring engine speed and ensuring optimal performance in your vehicle. With its advanced magnetic technology, this speed sensor is designed to detect the passing of ring gear teeth or other ferrous projections, generating precise electrical impulses that are sent to the speed control unit. The MSP678 Rotate Speed Sensor is specifically designed for easy installation, making it a hassle-free addition to your engine. It is mounted in the ring gearcase or flywheel bell housing, ensuring accurate readings while maintaining the integrity of your engine. The threaded hole for the speed sensor should be positioned perpendicular to the centerline of the crankshaft and centered over the ring gear teeth for maximum effectiveness. To ensure a secure fit, a spot face is included, providing a flat surface to anchor the lock nut. Simply screw the speed sensor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the lock nut. This ensures a stable and reliable connection for accurate readings. One of the key features of the MSP678 Rotate Speed Sensor is its versatility. It can be used with any ferrous gear as long as the resulting signal meets the speed control unit specifications. This allows for flexibility in choosing the gear that best suits your needs. To ensure optimal performance, the wire leads of the MSP678 Rotate Speed Sensor should be twisted for their entire length. This helps minimize interference and ensures accurate transmission of signals from the sensor to the control unit. Additionally, if needed, the leads can be shielded to further protect against any external electrical interference. With a pickup length of 5 inches and an overall length of 6.125 inches, the MSP678 Rotate Speed Sensor offers the perfect balance between compact size and reliability. The thread size of 5/8-18 UNF-2A and drill size of 37/64 ensure a secure fit and compatibility with a wide range of engines. Choose the MSP678 Rotate Speed Sensor for its superior accuracy, easy installation, and reliability. With its advanced magnetic technology and precise measurements, this speed sensor ensures that your engine operates at its optimal speed for maximum performance. Don't compromise on quality – choose the MSP678 Rotate Speed Sensor today. |
| OEM NO. | MSP678 Specification Rotate speed sensor, speed sensor, generator sensors Item MSP678 Pickup Length 5.00" Thread Length 4.75" Overall Length 6.125" Thread Size 5/8-18 UNF-2A Drill Size 37/64 Introduction*The magnetic speed sensor indicates |
| Brand | HUPARTS |
Shipping
Shipping to: Worldwide
Delivery Time: To USA 3-8 business days,To Other countries 4-9 business days
(This is normal condition,but sometimes int'l delivery is highly depended on the courier company and local customs/duties)
Handling time
Will usually ship within 2 business days of receiving cleared payment.
Payment
Payment methods: Paypal / Credit Card / Bank Transfer / West Union /Sofort / Bancontact / Przelewy24 / EPS / Giropay / iDEAL / SEPA Direct Debit / Multibanco
Taxes
For most of the countries, our customers do not need to pay for importing fees, duties or VAT(Valued Additional Tax). However, for some limited countries (especially for some European countries such as Germany, Italy, UK and Canada, etc.) may need to pay duties or VAT according to your countries’ levying rules.
Track Your Order
When it ships ,an email will arrive you contains tracking No. and check web site. or check through the following link
https://www.huparts.com/track-your-order
We offer the right products at reasonable prices with a quality assurance. Our new aftermarket parts come with a 2-year warranty.
With over 10,000 products in stock, we can ship your order worldwide on the same day.
Enjoy the convenience of our 90-day free return or exchange policy.
Take advantage of our free or low-cost shipping options to save on freight charges.
Rest assured that your payment information is protected with SSL certification and encryption.
Enjoy your shopping with us
