GTIN, UPC, EAN, JAN or ISBN
492003389044
Compatible Model Brand
HUPARTS FOR Anto
Replacement Part Number
322C 324D 325C 325D 328D 329D 329DL
Brand
HUPARTS
Specification
Application Excavator Spare Parts Name HUB Parts No 2396599 Model 322C 324D 325C 325D 328D 329D 329DL Delivery time Immediately Quality High Guarantee Brand Anto MOQ 1 PCS Design made in china Means of transport By sea/air, DHL Packing As request or standard packing
Application
EXCAVATOR 322C 322C FM 324D 324D FM 324D FM LL 324D L 324D LN 324E 324E L 324E LN 325C 325C FM 325D 325D FM 325D FM LL 325D L 325D MH 326D L 328D LCR 329D 329D L 329D LN 329E 329E L 329E LN M325D L MH M325D MH
Related CAT Parts HUB We Can Supply
CAT 7C8369 HUB CAT 4190423 HUB-IDLER GEAR CAT 1786447 HUB CAT 2552946 HUB CAT 2430272 HUB-WHEEL CAT 2430182 HUB-WHEEL CAT 2552946 HUB CAT 1786447 HUB CAT 1279554 HUB CAT 1881475 HUB CAT 1881474 HUB CAT 1C7112 HUB AS CAT 1545561 HUB-COUPLING CAT 1241661 HUB CAT 1662914 HUB-BRAKE CAT 8E6929 HUB CAT 9U8126 HUB AS CAT 8E6965 HUB DRUM CAT 1W5009 CRANKSHAFT AS CAT 7W4502 CRANKSHAFT GP CAT 7W2504 CRANKSHAFT GP CAT 7C6945 SENSOR GP-SPEED CAT 2W6833 SENSOR GP-ENGINE CAT 2W1732 SENSOR GP-PRESSURE
We could supply the following spare parts
1 Hydraulic parts: hydraulic pump, main valve, hydraulic cylinder, final drive, travel motor, swing machinery, swing motor etc.
2 Engine parts: engine assa y, piston, piston ring, cylinder block, cylinder head, crankshaft, turbocharger, fuel injection pump, starting motor and alternator etc.
3 Undercarriage part: Track roller, Carrier roller, Track Link, Track shoe, Sprocket, Idler and Idler cushion etc.
4 Cab parts: operatora s cab, wiring harness, monitor, controller, seat, door etc.
5 Cooling parts: Radiator, air conditioner, compressor, after cooler etc.
6 Other parts: Service kit, swing circle, engine hood, swing joint, fuel tank, filter, boom, arm, bucket etc.
Information
Steel Piston
Illustration 1 g02547117
Table 1
Specification for 212-3652 Piston and Rod Gp
Item Qty Part Specification Description
- - - Install the rod and steel pistons in the engine with the part number on the rod assembly to the rear of the engine. The rear of the engine is the flywheel end of the engine. Lubricate the rod and piston group with clean engine oil before you insert the rod and piston group into the block.
1 1 238-2720 Piston Body As Before assembly, lubricate the entire piston body assembly (1) in zone (A) with clean engine oil.
2 1 197-9386 Piston Ring Install the piston ring with the side marked "UP-1" toward the top of the piston. The colored stripe faces to the right of the piston ring end gap.
Thickness of the new top piston ring is 3.32 mm (0.131 inch).
Clearance between the ends of the piston ring in a cylinder liner bore of 110 mm (4.3 inch) is 0.40 0.10 mm (0.016 0.004 inch).
The piston ring has an increase in clearance for each 0.03 mm (0.001 inch) increase in the cylinder liner bore of 0.09 mm (0.004 inch)
3 1 197-9353 Piston Ring Install the piston ring with the side marked "UP-2" toward the top of the piston. The colored stripe faces to the right of the piston ring end gap.
Thickness of the new intermediate piston ring is 2.980 0.010 mm (0.1173 0.0004 inch).
Clearance between the ends of the piston ring in a cylinder liner bore of 110 mm (4.3 inch) is 1.200 0.125 mm (0.0472 0.0049 inch).
The piston ring has an increase in clearance for each 0.03 mm (0.001 inch) increase in the cylinder liner bore of 0.09 mm (0.004 inch)
4 1 238-2706 Piston Ring The oil control ring has a spring that is installed with the ring. The gap in the spring should be a distance of 180 degrees from the ring end gap when the oil control ring is assembled. The colored portion of the spring must be visible at the ring end gap.
Thickness of the new oil control piston ring is 3.985 0.010 mm (0.1569 0.0004 inch).
Clearance between the ends of the piston ring in a cylinder liner bore of 110 mm (4.3 inch) is 0.45 0.15 mm (0.018 0.006 inch).
The piston ring has an increase in clearance for each 0.03 mm (0.001 inch) increase in the cylinder liner bore of 0.09 mm (0.004 inch)
- - - After the piston rings have been installed, rotate the piston rings so that the end gaps are 120 degrees from each other.
5 1 197-9371 Piston Pin Before assembly, lubricate with clean engine oil.
Outer diameter is 39.988 0.005 mm (1.5743 0.0002 inch).
Length is 74.50 0.15 mm (2.933 0.006 inch).
Refer to Reuse And Salvage Guidelines for more information on the piston, piston pins, and the retaining rings.
Part Diagram
Adva This product is meticulously designed to ensure exceptional performance and durability, making it an ideal choice for various industrial and engineering applications. Specifically engineered for maximum efficiency, Compatible with 2396599 HUB Excavator Replacement Parts For CAT 322C 324D 325C 325D 328D 329D 329DL 329E M325D provides unparalleled performance in challenging environments. Its robust construction ensures durability, while its design meets the diverse needs of industrial and engineering tasks. Whether for maintenance, repair, or upgrades, this product guarantees superior functionality and reliability. An excellent choice for professionals seeking quality and precision.
492003389044
HUPARTS FOR Anto
322C 324D 325C 325D 328D 329D 329DL
HUPARTS
Share your thoughts with other customers